ECO T 600 PRO PLUS – ECO D 600

B

AquaPrime watermakers are designed for use on large vessels and can produce an average of 600 liters of fresh water per hour.

The system is equipped with three large membranes and can be installed either as a compact assembly or in a distributed layout.

This device operates fully automatically, but can also be used manually when needed.

Device Material Information

  • Low Pressure Pump, LOWARA (Made in Italy)
  • High Pressure Pump, INTERPUMP (Made in Italy)
  • Electric Motor, VOLT (Made in Turkey)
  • Membrane Housing (Carbon Composite Exterior), AQUAPRIME (Made in Turkey)
  • Membrane, FILMTEC (Made in USA)
  • Flowmeter (L/h), (Made in Italy)
  • High Pressure Pipes (Sea Water Compatible Fittings) 316 SS (Made in Italy)
  • Pressure Sensors 316 SS, AQUAPRIME (Made in Turkey)
  • Digital Control Panel, AQUAPRIME (Made in Turkey)
  • Remote Control Cable 10–15 m, AQUAPRIME (Made in Turkey)
  • Sea Water Pre-Filters, ATLAS (Made in Italy)
  • Three-Way Valve, BURKERT (Made in Germany)
  • Conductivity Sensor, AQUAPRIME (Made in Turkey)
  • Water Temperature Sensor, AQUAPRIME (Made in Turkey)
  • Digital Flowmeter, (Made in Germany)
  • Digital Voltmeter 220V, 50 Hz (On Panel), AQUAPRIME (Made in Turkey)
  • 10″ Carbon Filter on Backwash Line, ATLAS (Made in Italy)
  • 10″ Carbon Filter on Fresh Water Line, ATLAS (Made in Italy)
  • 10″ 5–25 Micron String-Wound Filter on Sea Water Line, ATLAS (Made in Italy)

 

Technical Specifications

 

MODEL ECO T 600 PRO PLUS ECO D 600
VOLTAGE 380 / 50 Hz 380 / 50 Hz
CURRENT 9.2 A 9.2 A
POWER 4 kW 4 kW
OPERATING PRESSURE 58 Bar 58 Bar
PRODUCTION CAPACITY 600 L/h 600 L/h
DAILY PRODUCTION CAP. 14,400 L/d 14,400 L/d
SEA WATER INLET 1″ 1″
TANK INLET 12 mm 12 mm
WASTE WATER 3/4″ 3/4″
MEMBRANE SIZE 4040 / 3 4040 / 3
FRAME SIZE (W*H*D) 1300 × 580 × 620 1300 × 580 × 620
WEIGHT 160 125
MOTOR SPEED 1450 rpm 1450 rpm
NOISE LEVEL 75 dB 75 dB